News Categories

In demanding operating conditions, selecting the wrong sealing material often leads to mechanical seal failure, resulting in serious issues such as leakage.

A PDC bit’s cutting structure gets most of the attention, but in real drilling the nozzle package often decides whether the bit stays clean, stays cool, and stays alive.

Exploring methods for installing tungsten carbide buttons onto drill bits: including cold press interference fit, hot mounting (shrink fit), and brazing.

A tungsten carbide button (often called a carbide button insert) is a small, dense wear element installed into a drilling tool. The steel bit body delivers energy and holds geometry+

"Tungsten carbide buttons" (also called carbide buttons or carbide button inserts) are cemented carbide inserts—most commonly WC-Co (tungsten carbide grains in a cobalt binder)

If you make (or buy) carbide rod blanks for solid carbide end mills and carbide drill blanks, cobalt is one of the few levers that reliably changes behavior at the cutting edge.

Learn how WC grain size and binder percentage change hardness, wear resistance, and toughness in carbide rods for solid carbide end mills and drill blanks.

Tungsten carbide centrifuge tiles are generally the stronger choice where a decanter sees combined impact and abrasion, especially around feed acceleration, scroll-flight leading edges, and solids-discharge zones. Ceramic tiles can be highly effective over broader surfaces dominated by stable sliding abrasion and relatively low impact.

When I help abrasive blasting users select carbide nozzles, I don’t begin with the catalog. I begin with two questions: (1) What abrasive are you actually running? and (2) What airflow can you truly deliver at the nozzle? Everything else follows.

In abrasive slurries and pump environments where solids are present (sand, fines, scale, hard particulate), tungsten carbide bushings usually last longer than bronze bushings because carbide is far more resistant to abrasion and erosive wear.