News Categories

Learn how to read density, HRA hardness, and TRS data on carbide rod mill test reports.

What happens to carbide rod blanks when spindle speed climbs? Science meets the shop floor.

Tungsten carbide mechanical seal faces are used in demanding rotating equipment because they combine high wear resistance, compressive strength, dimensional stability, and useful resistance to mechanical shock.

 Audit 7 things: powder purity, Co binder, sintering temp, dim inspection, traceability, lab, lead time.

In 2026 Chinese carbide rods hit 95% of Japan/EU performance at 40-60% of cost.

When a slurry-pump shaft bushing wears out long before the planned overhaul, changing to a harder material seems like the obvious solution.Sometimes it is the correct solution. In other cases, the same failure would return because the real cause is insufficient flushing, incorrect running clearance, shaft misalignment, poor installation, dry contact, or a worn mating sleeve.

In severe-service valves, the cage is often the part that decides whether pressure drop is controlled safely or released in a destructive way.

When buyers ask how long a tungsten carbide sandblasting nozzle will last, the honest answer is: it depends on the blasting system.Tungsten carbide is widely used because it offers a strong balance of abrasion resistance, toughness, cost, and general-purpose blasting performance.

Over the past 4 years, our quality team at Langsun Carbide has performed failure analysis on 140+ returned tungsten carbide bushings from valve applications. Approximately 70% of the failures were not caused by material defects

Every nozzle supplier claims "tungsten carbide." The material may be the same name. The process never is. This article walks you through our production floor at Langsun Carbide — from powder blending to final bore grinding — and shows you exactly which step creates the 8× life gap between a commodity nozzle and an engineered one.