News Categories

When you manage slurry pump overhaul cycles at a Florida phosphate mining operation, the bushing wear life determines whether you shut down every six months or push past eighteen. 

• Tungsten carbide rotary burrs last 19× longer than HSS burrs in Abu Dhabi oilfield wellhead completion deburring — because K30-grade tungsten carbide maintains its cutting edge geometry at temperatures exceeding 600°C, while HSS loses hardness above 300°C and begins dulling within 2–3 minutes of operation in the ADNOC testing protocol.

When a pump, mixer, valve assembly, or other rotating machine develops excessive bushing clearance, the bushing is often blamed immediately.

When a pump handles sand, ore particles, catalyst fines, wastewater solids, crystals, or other abrasive material, the natural reaction is to choose the hardest possible seal faces.

Sour gas service environments containing hydrogen sulfide (H₂S) require valve trim components that resist sulfide stress cracking (SSC) and maintain dimensional stability under erosive flow conditions. Tungsten carbide valve disks, when manufactured to NACE MR0175/ISO 15156 compliance, offer a proven solution for choke valves, control valves, and surface safety valves in gas processing, oil production, and refinery applications. This article covers the NACE compliance framework for cemented carbide components, the manufacturing controls that determine SSC resistance in tungsten carbide grades, field performance data from sour gas installations, and a practical qualification guide for procurement engineers. Chang Wu, Export Sales Manager at Langsun Carbide, shares technical insights based on 15+ years of supplying custom-engineered tungsten carbide wear parts to oil and gas operators globally.

When someone asks me what running clearance should be used for tungsten carbide bushings , I understand why they hope for one simple number.

Sandblasting equipment OEMs across Europe and North America increasingly specify tungsten carbide nozzles over boron carbide or alumina ceramic alternatives because the 10,000-hour wear benchmark changes component replacement math. In our Ningbo factory, we produce custom-spec tungsten carbide sandblasting nozzles for nine OEM accounts across Germany, Italy, and the United States — and every single one of them negotiates on three parameters before a single unit ships: bore tolerance, cobalt-nickel binder ratio, and surface finish Ra. This article lays out the wear data, the custom-spec logic, and the QA framework that sandblasting equipment OEMs use to qualify a nozzle supplier for production orders.

Unplanned downtime costs large mining operations $20,000–$50,000 per hour. Six tungsten carbide wear part designs — carbide buttons, slurry nozzles, pump bushings, wear plates, centrifuge tiles, and seal rings — are cutting replacement frequency by 3×–7× in 2026. Our factory ships 200,000+ carbide wear parts monthly; the designs below are what maintenance teams reorder most often. Every design covered here has been manufactured, tested, and shipped by Langsun Carbide.

1. When Standard Trim Fails in H₂S — The 3 a.m. Call from Houston
2. Why Cobalt-Binder Carbide Disintegrates in Sour Gas (And Why Nickel Doesn't)
3. How We Engineer Carbide Valve Trim That Meets NACE MR0175 Without Over-Specifying
4. From Your Drawing to a Finished Trim Set — Our Custom Manufacturing Workflow
5. What North American Repair Shops Report After 12 Months on WC-Ni Trim
6. How to Specify a Sour-Service Carbide Trim Order That Arrives On Time and On Spec