News Categories

When engineers compare a tungsten carbide bushing with a silicon carbide bushing, the discussion often becomes too simple: tungsten carbide is tougher; silicon carbide is harder and more corrosion resistant.

Choosing tungsten carbide seal rings for a slurry pump is not simply a matter of selecting the hardest available material. Slurry pumps expose mechanical seals to abrasive solids, fluctuating concentration, pressure changes, vibration, temperature changes, and sometimes corrosive process chemistry.

Langsun Carbide supplies blanks to medical device and cutting tool manufacturers worldwide.

The shorter working title used throughout this article is "Carbide Rod RFQ Checklist."

When a tungsten carbide seal ring develops a chip at its inner diameter (ID) or outer diameter (OD), the immediate reaction is often to blame carbide brittleness or material quality.

A drawing for a tungsten carbide seal ring may look simple: an outside diameter, an inside diameter, and a thickness. In practice, those three dimensions are rarely enough to manufacture a reliable mechanical-seal face.

This article references only published ISO 286-1 tolerance standards, industry-standard carbide rod packaging specifications, and Langsun Carbide's own production engineering practice. 

For cutting tool manufacturers producing carbide rod for micro end mills under 3mm diameter, the engineering-correct grain size is ultrafine 0.2-0.6 μm (commonly 0.4 μm and 0.6 μm), not the standard 0.8-1.2 μm used for general-purpose cutting tools. 

• 1. Metric vs Inch Diameter Range Standard Comparison

• 1. 4-Diameter Range Grinding Stock Allowance Framework